This must be modified if another partition is used for the rootfs ( /dev/mmcblk0p1 for 1st partition, /dev/mmcblk0p3 for 3rd, and so on). Note that /dev/mmcblk0p2 matches the 2nd partition on SD card. Root=/dev/mmcblk0p2 rw rootwait\ run qspiboot Be careful before using the write command. For example, the following commands create an ext3 partition occupying all free space available on the SD ~]$ sudo fdisk /dev/sdbĬhanges will remain in memory only, until you decide to write them.
Insert an SD card to the Linux host and create an ext3 partition on it with the size big enough for the root file system. Build the project with the make command. SDHCI platform support for the Freescale eSDHC i.MX controller SDHCI support on the platform specific bus Secure Digital Host Controller Interface support Copy hekateipl.ini to the bootloader folder on your SD card Copy LockpickRCM. If youre asked to merge the bootloader folders, do so. zip file to the root of your SD card Copy the bootloader folder from the bootlogos.zip file to the root of your SD card. For this, check (enable) the following options: Copy the bootloader folder from the Hekate. Modify the kernel configuration to enable SD card support. 
Initial RAM filesystem and RAM disk (initramfs/initrd) support For this, run make kmenuconfig in the project directory and uncheck (disable) the Initial RAM filesystem.
Modify the Linux kernel configuration to not include the rootfs into the uImage. Step through the following procedure in order to boot Linux on the VF6 System-On-Module (SOM) with rootfs mounted on an SD card:
0 kommentar(er)
